However, keep in mind that using this configuration option, hot-swapping is not supported.The standard allows desktop computers to access technology used in mobile computers including laptops, hand-helds, pen-based, and notebook systems.
The cards, which are compliant with the PCMCIA standard, are called PC cards. Each PC card is 54 mm in width, but the height varies based on type. Type I cards are 3.3 mm thick and are usually memory cards such as FLASH and STATIC RAM. Type II cards are 5mm thick and are typically peripheral function IO cards such as serial, parallel, fax-modem, and LAN. Type III cards are 10.5 mm thick and are usually rotating media such as hard disks. Quatech manufactures a line of serial products for RS-232, RS-422485 and EPP Parallel Port. Please refer to the appropriate section for more information regarding each product. Upgrades the single-drive SSD-B1 to the equivalent of the SSD-D1. However, certain DOS programs will not run from Windows 9598 environments, even from a Windows 9598 DOS box. However, when the system is started or restarted into DOS mode, the Card and Socket Services the Windows 9598 environment uses are stopped. So when the system is in DOS mode, the customer will be unable to configure the PCMCIA card and cannot execute his DOS application. The first would be to use the DOS enabler, which is provided on the diskette that comes with the Quatech PCMCIA card. This option only works if the system uses an Intel 82365 PCMCIA controller chip. If the user is uncertain about which PCMCIA controller is installed on the system, please contact the manufacturer of the system. The drawback to this method is that hot-swapping is not supported. This option does not rely on the type of Socket controller used. Windows 95 Oem Sr2 For Multifunction Cardbus Cards Drivers Are RequiredIf the DOS Card and Socket Service drivers are required, they can be obtained from Quatech, who resells Cardsoft by Systemsoft. However, every effort has been made to address each mentioned part of Card and Socket Service generically. If the user chooses to use Card and Socket Services from another vendor, such as Phoenix Technologies or Databook, then there may some confusion as to which driver will perform the tasks described in these notes. Windows 95 Oem Sr2 For Multifunction Cardbus Cards Manual Or ContactIf there are questions about the drivers, please consult the Driver Manufacturers Users Manual or contact their Technical Support department. Insertion of the card should bring about a dialog box and a prompt for a driver. Use the.inf file to install the PC-Card into Windows 9598. No installation of DOS PCMCIA drivers should be required, and under no circumstances should you try to use the DOS enabler from within a DOS window. If an Intel 82365 PCMCIA controller chip is installed, try using the enabler to configure the card. If an Intel 82365 chip is present and successful configuration of the card occurs, you will be able to run your application.
0 Comments
Leave a Reply. |